Golden Software Blog

Helping you learn more about the latest product information, tips, tricks, techniques, and customer stories so you can visualize data and communicate results with ease.

Welcome to the Sondermülldeponie Kölliken (SMDK); the Kölliken Hazardous Waste Landfill

Rainer Albert is an experienced Surfer user and recently discovered the versatility of Voxler. Below outlines his contribution to the modeling of the Kölliken hazardous waste landfill using 3D visualizations from both Surfer and Voxler.

Kolliken Hazardous Waste Landfill

The landfill consists of a wide range of organic and inorganic wastes from the industry, commerce and public sectors. Over a 7 year span 475,000 tons of hazardous wastes were deposited in the landfill. The site’s restoration process started in 1985 and the site is currently being excavated and remediated under the large hall (as pictured above) in order to be fully restored by 2016.

Rainer uses Surfer to display the topography of the site along with the 3D rendering of buildings. The image below shows a 3D surface map with an overlaid contour map, post map and image. The building in the forefront is the Swalba and House Matter Hall.

Surfer 3D Surface Map - Topography

Topography at the end of 2011; Modeling done by ARGE Phoenix using Surfer.

Voxler is used to display the waste type and waste concentration from data collected between the surface and bottom layers. The distances between the surface and bottom can span up to 17 meters apart. In the below Voxler image, the transparent surface layer is overlaid with contour lines to display the landfill’s terrain while also displaying the chemical types and concentrations below.

Voxler Contour Lines Voxler Concentrations Map

This image, created in Voxler, details the Kölliken hazardous waste landfill’s terrain along with chemical types and concentrations.

The concentration of manganese in the site from a bird’s eye view. For the full views, click here.

For more information, visit the Surfer and Voxler webpages.

 

Comments

No comments made yet. Be the first to submit a comment
Guest
Tuesday, 26 September 2017

Captcha Image

Subscribe To Our Blog

Most Popular

This week's new feature series is a tutorial on how to use the new coordinate system dialogs in MapV...
Over the years, one of the most common questions asked is “How can I get my contour map out of Surfe...
For more than 20 years, Surfer mapping software has been used by representatives of nearly all indus...

Exceeding expectations

Go to top